   |
| GVM-150 |
| 15 Inputs, 1 M/E |
  |
| |
- Control Panel
- Main Unit
- Mechanical Dimensions
- Options Connections
|
|
15 analog(composite) and digital (SDI) video inputs
Frame Synchronizer at the each Input
4 syncronized Auxilliary outputs
Analog and digital outputs (Program, Preview)
2 KEY channels and 2 DSK channels
High-Quality Chromakey Technology
Logotype generator included
Still storage (up to 4 clips and up to 7 slides can be stored)
"Super WIPE" (up to 8 graphic wipes) function
Dual-channel "Picture in Picture" function
Dual-channel "MultiView" function
Delegation of the each physical input to any button (1-15, Black Test) of the Control Panel
12-bit analog-to-digital and digital-to-analog conversion
20-bit digital signal processing
4 GPI inputs, 4 GPI outputs
4 RS-422 ports for remote control
15 "TALLY" outputs
Redundant Power Supplay
Optional external Aux Control Panels (ACU-01). Up to 4 ACU-01 panels can be connected.
|
| |
 |
1 – Input modules installation area.
2 – Digital Processing and Synchronization module. It can be selected an internal or external synchronizing mode by the switcher, installed on this module. In the external
synchronizing mode an external reference signal must be given to reference input of the
vision mixer.
3 – External synchronization reference input.
4 – Installation position for PROGRAM OUTPUT module.
5 – Installation position for PREVIEW OUTPUT module.
6 – Installation position for AUX1, AUX2 OUTPUT module.
7 – Installation position for AUX3, AUX4 OUTPUT module.
|
|
Positions for input modules |
Both analog (PAL) signal modules and digital signal (SDI) modules can be used.
INPUT MODULES
Analog input module:ADC313
| ADC313 |
| Analog input module. It provides 12-bit analog to digital conversion. It can be used for composite signals |
 |
1 – Input connector for composite PAL1 signal
2 – Input connector for composite PAL2 signal
3 – Input connector for composite PAL3 signal
With Frame Synchronizers
|
| |
Digital input module:SDI305
| SDI305 |
| Digital input module for SDI input signal. |
 |
1 – Input connector for digital SDI1 signal
2 – Input connector for digital SDI2 signal
3 – Input connector for digital SDI3 signal
With Frame Synchronizers |
| |
Back to Top |
OUTPUT module. |
You can use various type of modules (OUT008xx) for Program, Preview and Auxiliary outputs:
0S1P
| Output Board, 1 x Composite PAL signal. |
|
1 – Output connector for composite PAL signal
|
| |
0S4P
| Output Board, 4 x Composite PAL signals. |
|
1 – Output connector for composite PAL signal
2 – Output connector for composite PAL signal
3 – Output connector for composite PAL signal
4 – Output connector for composite PAL signal
|
| |
0SYUV
| Output Board, Component YUV signal, switchable to PAL+YC by jumper, installed on the board. |
|
1 – Output connector for luminance Y signal
2 – Output connector for chrominance U
3 – Output connector for chrominance V
|
| |
1S1P
| Output Board, 1xSDI signal + 1xComposite PAL signal. |
|
1 – Output connector for composite PAL signal
2 – Output connector for digital SDI signal
|
| |
1S3P
| Output Board, 1xSDI signal + 3xComposite PAL signal. |
|
1 – Output connector for composite PAL signal
2 – Output connector for composite PAL signal
3 – Output connector for composite PAL signal
4 – Output connector for digital SDI signal
|
| |
1SYUV
| Output Board, 1xSDI signal + Component YUV signal, switchable to PAL+YC by jumper, installed on the board. |
|
1 – Output connector for luminance Y signal
2 – Output connector for chrominance U signal
3 – Output connector for chrominance V signal
4 – Output connector for digital SDI signal
|
| |
2S2P
| Output Board, 2xSDI signal + 2xComposite PAL signal. |
|
1 – Output connector for composite PAL signal
2 – Output connector for composite PAL signal
3 – Output connector for digital SDI signal
4 – Output connector for digital SDI signal
|
| |
1PYUV
| Output Board, 1xComposite PAL signal + Component YUV signal,switchable to PAL+YC by jumper, installed on the board. |
|
1 – Output connector for luminance Y signal
2 – Output connector for chrominance U signal
3 – Output connector for chrominance V signal
4 – Output connector for composite PAL signal
|
| |
There can be installed 6 modules for Auxiliary outputs. Each module contains outputs for two Auxiliary channels. Depending on installed module, each auxiliary channel can have various combinations of outputs:
1 output for SDI and 1 output for PAL signal;
2 outputs for SDI signal;
2 outputs for PAL signal.
You can use three types of modules for Auxiliary outputs:
SP
| Output Board, 1xSDI signal +1xComposite PAL signal for each Auxiliary output.
|
|
1 – Output connector of Auxiliary channel 1 for PAL signal
2 – Output connector of Auxiliary channel 1 for SDI signal
3 – Output connector of Auxiliary channel 2 for PAL signal
4 – Output connector of Auxiliary channel 2 for SDI signal
|
| |
P
| Output Board, 2xComposite PAL signal for each Auxiliary output.
|
|
1 – Output connector of Auxiliary channel 1 for PAL signal
2 – Output connector of Auxiliary channel 1 for PAL signal
3 – Output connector of Auxiliary channel 2 for PAL signal
4 – Output connector of Auxiliary channel 2 for PAL signal
|
| |
S
| Output Board, 2xSDI signal for each Auxiliary output.
|
|
1 – Output connector of Auxiliary channel 1 for SDI signal
2 – Output connector of Auxiliary channel 1 for SDI signal
3 – Output connector of Auxiliary channel 2 for SDI signal
4 – Output connector of Auxiliary channel 2 for SDI signal
|
| |
Back to Top |
| |
| Mechanical dimensions of GVM-150 Control Panel are shown here |
 |
| Mechanical dimensions of GVM-150 Main Unit are shown here |
 |
| Mechanical dimensions of ACU-01 are shown here |
 |
| |
| Connection between Control Panel and Main Unit is accomplished through the RS-232 protocol.
|
 |
| |
|
|
