   |
| GVM-2420 |
| 24 Inputs, 2 M/E |
  |
| |
- Control Panel
- Main Unit
- Mechanical Dimensions
- Options Connections
|
|
24 videoinputs
4 External Key inputs
Frame Synchronizer at the each Input
12 keyers
6 Auxiliary outputs
4 RS-422 ports
4 GPI inputs
4 GPI outputs
Flexibly assignable Clean Feed outputs
TIME LINE function allows to create sequence of states and transitions, which can be played in automatic or step-by-step mode
Three-channel nonvolatile storage for video clips and slides
Motion Logotype generator
12 bit analog-to-digital and digital-to-analog conversion
20 bit digital signal processing
|
| |
 |
1 Input modules installation area.
2 Input module for EXTERNAL KEY1 and EXTERNAL KEY2 signals.
3 Input module for EXTERNAL KEY3 and EXTERNAL KEY4 signals.
4 Synchronization module. Provides the internal(switcher in pos.INT) and the external(switcher in pos.EXT) synchronization modes for the vision mixer operation.
5 Outputs of the internal Black burst generator. In external synchronizing mode the generator is carried out from the input reference signal.
6 Synchronization reference input.
7 Digital processing module.
8 Installation position for PROGRAM OUTPUT module.
9 Installation position for PREVIEW OUTPUT module.
10 AUX1-AUX6 OUTPUT modules installation area.
11 Communication module. Povides connection with LAN and TALLY outputs.
12 TALLY outputs 1-24 connectors.
13 RJ-45 Main Unit to LAN connector.
14 POWER SUPPLAY Module. The module is Redundant, Hot-Swappable/Hot-Pluggable.
|
|
Positions for input modules |
Both analog (PAL/YC/YUV) signal modules and digital signal (SDI) modules can be used.
INPUT MODULES
Analog input module:ADC012,ADC012S
| ADC012 |
| Analog input module. It provides 12-bit analog to digital conversion. It can be used for YUV component, YC component or composite signals. Input signal format selection can be provided both by local on board rotary switcher or by selection from menu on the control display of the Control Panel. |
| ADC012S |
| Same as ADC012 but consists additional Serial Digital Output with converted analog input signal.
|
|
1 Input connector for luminance Y signal or composite PAL1*
2 Input connector for chrominance U signal or composite PAL2*
3 Input connector for chrominance V signal or composite PAL3*
4 Digital SDI output for converted input signal
With Frame Synchronizer
*component/composite modes selection of the analog module can be made by switcher installed on this module, as well as from the control panel menu.In the composite mode there is a capability of the input signals
switching from the control panel.
|
| |
Digital input module:SDI004,SDI004S,SDI004P,SDI004SP
| SDI004 |
| Digital input module for SDI input signal. |
| SDI004S |
| Modification SDI004S contains 2 additional SDI output with converted digital input signal. |
| SDI004P |
| Modification SDI004P contains additional composite PAL output with converted digital input signal. |
| SDI004SP |
| Modification SDI004SP contains additional composite PAL and 2 SDI output with converted digital input signal.
|
|
1 Input connector for digital SDI signal
2 Composite PAL output for converted input signal**
3 Digital SDI output for regenerated input signal**
4 Digital SDI output for regenerated input signal**
With Frame Synchronizer
** according to the switcher position synchronization of output signals is carried out from the synch generator of vision mixer or the input signal.
|
| |
Back to Top |
EXTERNAL KEY1, EXTERNAL KEY2 and EXTERNAL KEY3, EXTERNAL KEY4 input module |
Both the module for 2 analog and the module for 2 digital input signals is appropriate.
ANALOG KEY
|
1 Input connector for analog External Key1 (or External Key3) signal
2 Input connector for analog External Key2 (or External Key4) signal
|
| |
DIGITAL KEY
|
1 Input connector for digital External Key1 (or External Key3) signal
2 Input connector for digital External Key2 (or External Key4) signal
|
| |
Back to Top |
OUTPUT module. |
You can use various type of modules (OUT008xx) for Program, Preview and Auxiliary outputs:
0S1P
| Output Board, 1 x Composite PAL signal.
|
|
1 Output connector for composite PAL signal
|
| |
0S4P
| Output Board, 4 x Composite PAL signals.
|
|
1 Output connector for composite PAL signal
2 Output connector for composite PAL signal
3 Output connector for composite PAL signal
4 Output connector for composite PAL signal
|
| |
0SYUV
| Output Board, Component YUV signal, switchable to PAL+YC by jumper, installed on the board.
|
|
1 Output connector for luminance Y signal
2 Output connector for chrominance U
3 Output connector for chrominance V
|
| |
1S1P
| Output Board, 1xSDI signal + 1xComposite PAL signal.
|
|
1 Output connector for composite PAL signal
2 Output connector for digital SDI signal
|
| |
1S3P
| Output Board, 1xSDI signal + 3xComposite PAL signal.
|
|
1 Output connector for composite PAL signal
2 Output connector for composite PAL signal
3 Output connector for composite PAL signal
4 Output connector for digital SDI signal
|
| |
1SYUV
| Output Board, 1xSDI signal + Component YUV signal, switchable to PAL+YC by jumper, installed on the board.
|
|
1 Output connector for luminance Y signal
2 Output connector for chrominance U signal
3 Output connector for chrominance V signal
4 Output connector for digital SDI signal
|
| |
2S2P
| Output Board, 2xSDI signal + 2xComposite PAL signal.
|
|
1 Output connector for composite PAL signal
2 Output connector for composite PAL signal
3 Output connector for digital SDI signal
4 Output connector for digital SDI signal
|
| |
1PYUV
| Output Board, 1xComposite PAL signal + Component YUV signal,switchable to PAL+YC by jumper, installed on the board.
|
|
1 Output connector for luminance Y signal
2 Output connector for chrominance U signal
3 Output connector for chrominance V signal
4 Output connector for composite PAL signal
|
| |
Back to Top |
| |
| Mechanical dimensions of GVM-2420 Control Panel are shown here
|
 |
| Mechanical dimensions of GVM-2420 Main Unit are shown here
|
 |
| |
| Connection between Control Panel and Main Unit can be provided across 100BaseTX Switch .
|
 |
| |
|
|
