   |
| GVM-90 |
| 9 Inputs, 1 M/E |
  |
| |
- Control Panel
- Main Unit
- Mechanical Dimensions
|
|
9 analog(composite or component) and digital(SMPTE-259M) videoinputs
Frame Synchronizer at the each Input
2 keyers
20-bit digital signal processing
Logotype generator included
Analog and digital outputs (Program, Preview, AUX)
High-Quality Chromakey Technology
Redundant Power Supplay |
| |
 |
1 – Input modules installation area.
2 – Digital Processing and Synchronization module.
3 – External synchronization reference input.
4 – Installation position for PROGRAM OUTPUT module.
5 – Installation position for PREVIEW OUTPUT module.
6 – Installation position for AUX OUTPUT module.
|
|
Positions for input modules |
Both analog (PAL/YUV) signal modules and digital signal (SDI) modules can be used.
INPUT MODULES
Analog input module:ADC008
| ADC008 |
| Analog input module. It provides 12-bit analog to digital conversion. It can be used for YUV component or composite signals. |
 |
1 – Input 1:
-connector for luminance Y signasl or composite PAL*;
-connector for chrominance U signals;
-connector for chrominance V signals.
2 – Input 2:
-connector for luminance Y signasl or composite PAL*;
-connector for chrominance U signals;
-connector for chrominance V signals.
3 – Input 3:
-connector for luminance Y signasl or composite PAL*;
-connector for chrominance U signals;
-connector for chrominance V signals.
With Frame Synchronizers
*Input signal format selection can be provided by jumpers installed on the board of modules independently for each of input. |
| |
Digital input module:SDI005
| SDI005 |
| Digital input module for SDI input signal. |
 |
1 – Input connector for digital SDI1 signal
2 – Input connector for digital SDI2 signal
3 – Input connector for digital SDI3 signal
With Frame Synchronizers |
| |
Back to Top |
OUTPUT module. |
You can use various type of modules (OUT008xx) for Program, Preview and Auxiliary outputs:
0S1P
| Output Board, 1 x Composite PAL signal. |
|
1 – Output connector for composite PAL signal
|
| |
0S4P
| Output Board, 4 x Composite PAL signals. |
|
1 – Output connector for composite PAL signal
2 – Output connector for composite PAL signal
3 – Output connector for composite PAL signal
4 – Output connector for composite PAL signal
|
| |
0SYUV
| Output Board, Component YUV signal, switchable to PAL+YC by jumper, installed on the board. |
|
1 – Output connector for luminance Y signal
2 – Output connector for chrominance U
3 – Output connector for chrominance V
|
| |
1S1P
| Output Board, 1xSDI signal + 1xComposite PAL signal. |
|
1 – Output connector for composite PAL signal
2 – Output connector for digital SDI signal
|
| |
1S3P
| Output Board, 1xSDI signal + 3xComposite PAL signal. |
|
1 – Output connector for composite PAL signal
2 – Output connector for composite PAL signal
3 – Output connector for composite PAL signal
4 – Output connector for digital SDI signal
|
| |
1SYUV
| Output Board, 1xSDI signal + Component YUV signal, switchable to PAL+YC by jumper, installed on the board. |
|
1 – Output connector for luminance Y signal
2 – Output connector for chrominance U signal
3 – Output connector for chrominance V signal
4 – Output connector for digital SDI signal
|
| |
2S2P
| Output Board, 2xSDI signal + 2xComposite PAL signal. |
|
1 – Output connector for composite PAL signal
2 – Output connector for composite PAL signal
3 – Output connector for digital SDI signal
4 – Output connector for digital SDI signal
|
| |
1PYUV
| Output Board, 1xComposite PAL signal + Component YUV signal,switchable to PAL+YC by jumper, installed on the board. |
|
1 – Output connector for luminance Y signal
2 – Output connector for chrominance U signal
3 – Output connector for chrominance V signal
4 – Output connector for composite PAL signal
|
| |
Back to Top |
| |
| Mechanical dimensions of GVM-90 Control Panel are shown here |
 |
| Mechanical dimensions of GVM-90 Main Unit are shown here |
 |
| |
|
|
